Despite advances in wireless technologies, many computer networks still rely on cables as a physical medium for devices to transfer data. Several standard types of exist, including coaxial cable, twisted pair cable, USB cable, crossover cable, fiber optic cable, etc. Among these different types of network cable, many people may be unfamiliar with the patch cable and crossover cable. In fact, patch cable and crossover cable are two types of Ethernet cable, and they have the same physical characteristics. But what on earth is the difference between the patch cable and crossover cable?Before talking about patch cable and crossover cable, it’s very necessary to learn about the T-568A and T-568B standard. With regard to these two patch cable wiring schemes, there are two different connectivity forms. The T-568B wiring scheme is by far the most common, though many devices support the T-568A wiring scheme as well.

Cat6 Ethernet Patch Cables. ShowMeCables offers a wide variety of Cat6 options including shielded, snagless, plenum, outdoor-rated, and more. Stock cables range from six inches to 300 feet. Custom lengths down to the inch available as well. Ten different color options are also available to simplify color-coding projects. Copper Data Patch Cord Jacket Colors. NOTE: DoIT only provides gray ethernet patch cables. Gray: Standard ethernet connection. Green: Crossover ethernet connection. Yellow: POE (power over ethernet) Orange: Analog Non-Ethernet. Purple: Digital Non-Ethernet. Blue: Terminal server connection.

If both ends of the patch cords are wired on the basis of one standard, it is a straight through connection. Both the standards can be used for straight through cable. If not, it is a crossover connection. Some networking applications require an Ethernet crossover cable, which has a T-568A connector on one end and a T-568B connector on the other. This type of cable is typically used for direct computer-to-computer connections. The following section will introduce the straight through cable (or patch cable) and crossover cable in details. Many networking professionals use the term patch cable to refer to any kind of straight through cable.

So a patch cable is often called a straight through cable. In other words, patch cable does not change or swap along its way. Both ends use the same wiring standard: T-568A or T-568B. So both side (connector A and connector B) of patch cable have wire arrangement with same patch cable colors (as shown in the following picture).

Specifically, Pin 1 on connector A goes to Pin 1 on connector B, Pin 2 to Pin 2, etc. These patch cables are widely used for connecting the computer to the switches, hubs, or routers. Crossover cable, as the name suggests, cross over or swap on its way when coming from one end to the other. Unlike patch cable, crossover cable uses two different wiring standards on both end: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard.

Both side (connector A and connector B) of crossover cable have wire arrangement with different color, and the wires that come out of the connector A should match the correct pin at the connector B. As shown in the following wiring scheme, you can see that Pin 1 on connector A goes to Pin 3 on connector B, pin 2 to pin 6, pin 3 to pin 1 and pin 6 to pin 2, etc. The crossover cables are mainly used for connecting two routers, computers, or hubs. In brief, a crossover cable connects two devices of the same type to communicate together, like a PC to a PC, or a switch to a switch. The patch cable connects two different devices to each other, like a PC and a switch. The following scenarios will explain the different applications.If we have two computers connected directly to each other. And both PCs try to transmit on TX wire, their signals will collide.

Moreover, nothing will be sent on RX wire. Therefore, neither computer will be able to receive anything. At this point, the crossover cable is needed to make connections between two PCs. Since this kind of cable is crossed, the signal sent on TX wire from PC 1 can be received on the RX wire of PC 2.

This is the reason why the crossover cables are often used to connect two same devices. All in all, to determine if you have a patch cable or a crossover cable, what you need consider are the wiring of the cable and the situation in which you will use the cable.

This is my creation from the main hall of Ba Sing Se. This building is from avatar the last airbender. Additional NotesI've also made some skins of avatar have a look at them. View map now! The Minecraft Map, The great main hall of Ba Sing Se, was posted by timmythekiller. Description: This map is a recreation of Ba Sing Se from Avatar the Last Airbender. It is still a work in progress so we can use all the help we can get. We will be updating this and constantly improving the city. Server IP AvatarMC.com Version 1.12.2 Website AvatarMC.com Here is our server s recreation of the Ba Sing Se from Avatar the Last Airbender it is still very much a work in progress Royal Palace and inner ring are finished the lower ring and middle ring still need filling. The server requires no. Not finished yet so don't complain to me too much Coords 7 IMPORTANT I offer this map to the public free of charge in adherence to the. Home Home arrowright Minecraft Community Content arrowright Maps arrowright Ba Sing Se monorail station from Avatar Minecraft. I can imagine that recreating all of Ba Sing Se in Minecraft.

FS.COM offers a full range of colored patch cables (straight-through) including, Cat6, Cat6a and to meet your network requirements. In addition, network patch panels, network tools, Ethernet bulk cables and other cable assemblies are also available.

For more information, please contact us over sales@fs.com.Related Article: Tags.